R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

381
Figure 193 Apply a policy
Table 70 Policy application configuration items:
Item Remarks
Apply to
Specify the policy application mode:
• Local: Enable local PBR. Unless otherwise required, HP does not
recommend enabling local PBR.
• Interface: Enable interface PBR. Apply the policy on a selected interface.
Policy Name Type the name of the policy to be applied.
PBR configuration example
Source address based PBR configuration example
1. Network requirements
As shown in Figure 194, conf
igure PBR based on policy aaa to send TCP packets received from
GigabitEthernet 0/1 through next hop 10.120.1.2. Other packets are forwarded based on the routing
table.