R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

383
Figure 195 Add node 5 to policy aaa
# Add node 10 to policy aaa.
• Click Add on the policy configuration page.
• Type aaa as the policy name and 10 as node index, and set the mode to deny.
• Type 3102 as the number of the ACL for matching all IP packets.
• Click Apply.
d. Apply policy aaa to GigabitEthernet 0/1.
• Click the Application tab, and then click Add.
• Select the Interface check box and select GigabitEthernet 0/1.
• Select aaa as the policy name from the drop-down list.
• Click Apply.
Configuring PBR in the CLI
Defining a policy
To do… Use the command… Remarks
Enter system view system-view ––
Create a policy or
policy node and enter
PBR policy node view
policy-based-route policy-name [ deny |
permit ] node node-number
Required