R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

413
Figure 211 Interface configuration page
• Specify the working mode PIM-DM and click Apply.
• Click the icon corresponding to GigabitEthernet0/0 to enter its configuration page.
• Specify the working mode PIM-DM and click Apply.
• Select Network > Routing Management > IGMP from the navigation tree to enter the Interface
Configuration page.
• Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page.
Figure 212 Interface configuration page
• Select Enable from the drop-down list to enable IGMP.
• Specify the IGMP version to 2.
• Click Apply.
# On Firewall B, enable IP multicast routing, enable PIM-DM on each interface, and enable IGMP on
GigabitEthernet 0/1.
• After logging in to the Web interface of Firewall B, select Network > Routing Management >
Multicast Routing from the navigation tree to enter the Global Configuration page.
• Select Enable from the drop-down list to enable multicast routing.
• Click Apply.
• Select Network > Routing Management > PIM from the navigation tree to enter the Interface
Configuration page.
• Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page.
• Specify the working mode PIM-DM and click Apply.
• Click the icon corresponding to GigabitEthernet0/0 to enter its configuration page.
• Specify the working mode PIM-DM and click Apply.
• Select Network > Routing Management > IGMP from the navigation tree to enter the Interface
Configuration page.
• Click the icon corresponding to GigabitEthernet 0/1 to enter its configuration page.
• Select Enable from the drop-down list to enable IGMP.