R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

415
Configuring IGMP in the CLI
IGMP configuration task list
Complete these tasks to configure IGMP:
Task Remarks
Configuring basic functions of
IGMP
Enabling IGMP Required
Configuring IGMP versions Optional
Configuring static joining Optional
Configuring a multicast group filter Optional
Adjusting IGMP performance
Configuring IGMP message options Optional
Configuring IGMP query and response parameters Optional
Configuring IGMP fast-leave processing Optional
Configuring IGMP SSM
mapping
Enabling SSM mapping Optional
Configuring SSM mappings Optional
Configuring IGMP proxying
Enabling IGMP proxying Optional
Configuring multicast forwarding on a downstream
interface
Optional
NOTE:
• Confi
g
urations performed in IGMP view are effective on all interfaces, while confi
g
urations performed
in interface view are effective on the current interface only.
• If a feature is not configured for an interface in interface view, the global configuration performed in
IGMP view will apply to that interface. If a feature is confi
g
ured in both IGMP view and interface view,
the configuration performed in interface view will be given priority.
Configuring basic functions of IGMP
Configuration prerequisites
Before configuring the basic functions of IGMP, complete the following tasks:
• Configure any unicast routing protocol so that all devices in the domain are interoperable at the
network layer.
• Configure PIM-DM or PIM-SM
Before configuring the basic functions of IGMP, prepare the following data:
• IGMP version
• Multicast group and multicast source addresses for static group member configuration
• ACL rule for multicast group filtering
• The maximum number of multicast groups that can be joined on an interface