R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

420
To do... Use the command... Remarks
Configure the startup query
interval
startup-query-interval interval
Optional
For the system default, see the note
below.
Configure the startup query count startup-query-count value
Optional
For the system default, see the note
below.
Configure the IGMP query interval timer query interval
Optional
60 seconds by default
Configure the IGMP querier
robustness variable
robust-count robust-value
Optional
2 by default
Configure the maximum response
time for IGMP general queries
max-response-time interval
Optional
10 seconds by default
Configure the IGMP last member
query interval
last-member-query-interval
interval
Optional
1 second by default
Configure the other querier present
interval
timer other-querier-present
interval
Optional
For the system default, see the note
below.
2. Configuring IGMP query and response parameters on an interface
Follow these steps to configure IGMP query and response parameters on an interface:
To do... Use the command... Remarks
Enter system view system-view —
Enter interface view
interface interface-type
interface-number
—
Configure the startup query
interval
igmp startup-query-interval
interval
Optional
For the system default, see the note
below.
Configure the startup query count igmp startup-query-count value
Optional
For the system default, see the note
below.
Configure the IGMP query interval igmp timer query interval
Optional
60 seconds by default
Configure the IGMP querier
robustness variable
igmp robust-count robust-value
Optional
2 by default
Configure the maximum response
time for IGMP general queries
igmp max-response-time interval
Optional
10 seconds by default
Configure the IGMP last member
query interval
igmp last-member-query-interval
interval
Optional
1 second by default