R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

428
# Enable IP multicast routing on Firewall D, enable PIM-SM on each interface and enable IGMPv3 and
IGMP SSM mapping on GigabitEthernet 0/1.
<FirewallD> system-view
[FirewallD] multicast routing-enable
[FirewallD] interface gigabitEthernet 0/1
[FirewallD-GigabitEthernet0/1] igmp enable
[FirewallD-GigabitEthernet0/1] igmp version 3
[FirewallD-GigabitEthernet0/1] igmp ssm-mapping enable
[FirewallD-GigabitEthernet0/1] pim sm
[FirewallD-GigabitEthernet0/1] quit
[FirewallD] interface gigabitEthernet 0/2
[FirewallD-GigabitEthernet0/2] pim sm
[FirewallD-GigabitEthernet0/2] quit
[FirewallD] interface gigabitEthernet 0/3
[FirewallD-GigabitEthernet0/3] pim sm
[FirewallD-GigabitEthernet0/3] quit
# Enable IP multicast routing on Device A, and enable PIM-SM on each interface.
<DeviceA> system-view
[DeviceA] multicast routing-enable
[DeviceA] interface gigabitEthernet 0/1
[DeviceA-GigabitEthernet0/1] pim sm
[DeviceA-GigabitEthernet0/1] quit
[DeviceA] interface gigabitEthernet 0/2
[DeviceA-GigabitEthernet0/2] pim sm
[DeviceA-GigabitEthernet0/2] quit
[DeviceA] interface gigabitEthernet 0/3
[DeviceA-GigabitEthernet0/3] pim sm
[DeviceA-GigabitEthernet0/3] quit
The configuration on Device B and Device C is similar to that on Device A.
3. Configure a C-BSR and a C-RP
# Configure C-BSR and C-RP interfaces on Firewall D.
[FirewallD] pim
[FirewallD-pim] c-bsr GigabitEthernet 0/3
[FirewallD-pim] c-rp GigabitEthernet 0/3
[FirewallD-pim] quit
4. Configure the SSM group range
# Configure the SSM group range 232.1.1.0/24 on Firewall D.
[FirewallD] acl number 2000
[FirewallD-acl-basic-2000] rule permit source 232.1.1.0 0.0.0.255
[FirewallD-acl-basic-2000] quit
[FirewallD] pim
[FirewallD-pim] ssm-policy 2000
[FirewallD-pim] quit
The configuration on Device A, Device B and Device C is similar to that on Firewall D.
5. Configure IGMP SSM mappings
# Configure IGMP SSM mappings on Firewall D.