R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

434
Configuring PIM-SM
Table 78 PIM-SM configuration task list
Task Remarks
Globally enable multicast
routing
Required
Globally enable multicast routing after selecting Network > Routing
Management > Multicast Routing. For more information, see “Multicast routing
configuration.”
Configuring PIM interfaces
Required
Enable PIM-SM on an interface.
By default, PIM is disabled on an interface.
Configuring advanced PIM
features
Optional
• Enable the auto-RP function, which is disabled by default.
• Configure the register message checksum and calculation method.
Displaying PIM neighbor
information
Optional
Configuring PIM-SSM
Table 79 PIM-SSM configuration task list
Task Remarks
Globally enable multicast
routing
Required
Globally enable multicast routing after selecting Network > Routing
Management > Multicast Routing. For more information, see “Multicast routing
configuration.”
Configuring PIM interfaces
Required
Enable PIM-SSM on an interface.
By default, PIM is disabled on an interface.
Configuring advanced PIM
features
Optional
Configure the SSM group range. By default, the SSM group range is
232.0.0.0/8.
Displaying PIM neighbor
information
Optional
Configuring PIM interfaces
After you log into the Web interface, select Network > Routing Management > PIM from the navigation
tree to enter the PIM interface configuration page, as shown in Figure 205.
Click the icon to enter the
configuration page of the specified PIM interface, as shown in Fi g u re 218 .