R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

460
To do... Use the command... Remarks
View the content of the PIM
routing table
display pim routing-table
[ group-address [ mask
{ mask-length | mask } ] |
source-address [ mask { mask-length
| mask } ] | incoming-interface
[ interface-type interface-number |
register ] | outgoing-interface
{ include | exclude | match }
{ interface-type interface-number |
register } | mode mode-type | flags
flag-value | fsm ] *
Available in any view
View the RP information
display pim rp-info
[ group-address ]
Available in any view
Reset PIM control message
counters
reset pim control-message counters
[ interface interface-type
interface-number ]
Available in user view
PIM-DM configuration example
Network requirements
• Receivers receive VOD information through multicast. The receiver groups of different organizations
form stub networks, and one or more receiver hosts exist in each stub network. The entire PIM
domain operates in the dense mode.
• Host A and Host C are multicast receivers in two stub networks N1 and N2.
• Firewall D connects to the network that comprises the multicast source (Source) through
GigabitEthernet 0/0.
• Firewall A connects to N1 through GigabitEthernet 0/0, and to Firewall D through GigabitEthernet
0/1.
• Firewall B and Firewall C connect to N2 through their respective GigabitEthernet 0/0, and to
Firewall D through their respective GigabitEthernet 0/1.
• IGMPv2 is to run between Firewall A and N1, and between Firewall B/Firewall C and N2.