R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

464
PIM-SM non-scoped zone configuration example
Network requirements
• Receivers receive VOD information through multicast. The receiver groups of different organizations
form stub networks, and one or more receiver hosts exist in each stub network. The entire PIM-SM
domain contains only one BSR.
• Host A and Host C are multicast receivers in two stub networks N1 and N2. Firewall D connects to
the network that comprises the multicast source (Source) through GigabitEthernet 0/0. Device A
connects to stub network N1 through GigabitEthernet 0/1, and to Firewall D and Firewall E through
GigabitEthernet 0/0 and GigabitEthernet 0/2 respectively. Device B and Device C connect to stub
network N2 through their respective GigabitEthernet 0/1, and to Firewall E through their respective
GigabitEthernet 0/0.
• Both GigabitEthernet 0/2 on Firewall D and GigabitEthernet 0/3 on Firewall E act as C-BSRs and
C-RPs; the C-BSR on Firewall E has a higher priority; the range of multicast groups served by the
C-RP is 225.1.1.0/24; modify the hash mask length to map a certain number of consecutive group
addresses within the range to the two C-RPs.
• IGMPv2 is to run between Device A and N1, and between Device B/Device C and N2.