R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

471
Network diagram
Figure 228 Network diagram for PIM-SM admin-scope zone configuration
Device Interface IP address Device Interface IP address
Device
A
GE0/1 192.168.1.1/24 Firewall D GE0/1 10.110.4.2/24
GE0/2 10.110.1.1/24 GE0/2 10.110.7.1/24
Firewall B GE0/1 192.168.2.1/24 GE0/3 10.110.8.1/24
GE0/2 10.110.1.2/24 Device E GE0/1 192.168.4.1/24
GE0/3 10.110.2.1/24 GE0/2 10.110.5.2/24
GE0/4 10.110.3.1/24 GE0/3 10.110.7.2/24
Firewall C GE0/0 192.168.3.1/24 Firewall F GE0/1 10.110.9.1/24
GE0/1 10.110.4.1/24 GE0/2 10.110.8.2/24
GE0/2 10.110.5.1/24 GE0/3 10.110.3.2/24
GE0/3 10.110.2.2/24 Device G GE0/1 192.168.5.1/24
GE0/4 10.110.6.1/24 GE0/2 10.110.9.2/24
Device H GE0/0 10.110.10.1/24 Source 1 - 192.168.2.10/24
GE0/1 10.110.6.2/24 Source 2 - 192.168.3.10/24
Device I GE0/0 192.168.6.1/24 Source 3 - 192.168.5.10/24
GE0/1 10.110.10.2/24
Configuration procedure
1. Configure IP addresses and unicast routing
Configure the IP address and subnet mask for each interface as per Figure 228. T
he detailed
configuration steps are omitted here.
S2
/2
P
OS5/1
Eth
1/1
S2/1
Eth1/1
POS5/1