R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

63
Configuration procedure
1. Configure Device A.
# Configure an MST region.
• Log in to Device A. Select Network > MSTP > Region from the navigation tree and then click Modify.
• Configure the region name as example.
• Set the revision level to 0.
• Select the Manual radio button.
• Select 1 in the Instance ID drop-down list.
• Set the VLAN ID to 10.
• Click Apply.
• Repeat the steps above to map VLAN 30 to MSTI 3 and VLAN 40 to MSTI 4.
• Click Activate.
# Configure MSTP globally.
• Select Network > MSTP > Global from the navigation tree.
• Select Enable in the Enable STP Globally drop-down list.
• Select MSTP in the Mode drop-down list.
• Select the check box in front of Instance.
• Set the Instance ID field to 1.
• Set the Root Type field to Primary.
• Click Apply.
2. Configure Device B.
# Configure an MST region. (The procedure here is the same as that of configuring an MST region on
Device A.)
# Configure MSTP globally.
• Select Network > MSTP > Global from the navigation tree.
• Select Enable in the Enable STP Globally drop-down list.
• Select MSTP in the Mode drop-down list.
• Select the check box before Instance.
• Set the Instance ID field to 3.
• Set the Root Type field to Primary.
• Click Apply.
3. Configure Device C.
# Configure an MST region. (The procedure here is the same as that of configuring an MST region on
Device A.)
# Configure MSTP globally.
• Select Network > MSTP > Global from the navigation tree.
• Select Enable in the Enable STP Globally drop-down list.
• Select MSTP in the Mode drop-down list.
• Select the check box before Instance.