R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

66
Task Remarks
Configuring protection functions Optional
Complete the following tasks to configure MSTP:
Task Remarks
Configuring the root
bridge
Setting the spanning tree mode
Optional
By default, the device works in
MSTP
mode.
Configuring an MST region Required
Configuring the root bridge or a
secondary root bridge
Optional
Configuring the device priority Optional
Configuring the maximum hops of an
MST region
Optional
Configuring the network diameter of a
switched network
Optional
Configuring spanning tree timers Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring the port link type Optional
Configuring the mode a port uses to
recognize/send MSTP packets
Optional
Enabling the spanning tree feature
Required
Configuring the leaf
nodes
Configuring an MST region Required
Configuring the device priority Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring path costs of ports Optional
Configuring the port priority Optional
Configuring the port link type Optional
Configuring the mode a port uses to
recognize/send MSTP packets
Optional
Enabling the spanning tree feature Required
Performing mCheck Optional
Configuring Digest Snooping Optional
Configuring No Agreement Check Optional
Configuring protection functions Optional