R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

<DeviceA> system-view

[DeviceA] stp region-configuration

[DeviceA-mst-region] region-name example

[DeviceA-mst-region] instance 1 vlan 10

[DeviceA-mst-region] instance 3 vlan 30

[DeviceA-mst-region] instance 4 vlan 40

[DeviceA-mst-region] revision-level 0

# Activate MST region configuration.

[DeviceA-mst-region] active region-configuration

[DeviceA-mst-region] quit

# Specify the current device as the root bridge of MSTI 1.

[DeviceA] stp instance 1 root primary

# Enable the spanning tree feature globally.

[DeviceA] stp enable

3. Configuration on Device B

# Enter MST region view, configure the MST region name as example, map VLAN 10, VLAN 30, and

VLAN 40 to MSTI 1, MSTI 3, and MSTI 4 respectively, and configure the revision level of the MST region

as 0.

<DeviceB> system-view

[DeviceB] stp region-configuration

[DeviceB-mst-region] region-name example

[DeviceB-mst-region] instance 1 vlan 10

[DeviceB-mst-region] instance 3 vlan 30

[DeviceB-mst-region] instance 4 vlan 40

[DeviceB-mst-region] revision-level 0

# Activate MST region configuration.

[DeviceB-mst-region] active region-configuration

[DeviceB-mst-region] quit

# Specify the current device as the root bridge of MSTI 3.

[DeviceB] stp instance 3 root primary

# Enable the spanning tree feature globally.

[DeviceB] stp enable

4. Configuration on Firewall.

# Enter MST region view, configure the MST region name as example, map VLAN 10, VLAN 30, and

VLAN 40 to MSTI 1, MSTI 3, and MSTI 4 respectively, and configure the revision level of the MST region

as 0.

<Firewall> system-view

[Firewall] stp region-configuration

[Firewall-mst-region] region-name example

[Firewall-mst-region] instance 1 vlan 10

[Firewall-mst-region] instance 3 vlan 30

[Firewall-mst-region] instance 4 vlan 40

[Firewall-mst-region] revision-level 0

# Activate MST region configuration.

[Firewall-mst-region] active region-configuration