R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

93
Flow logging configuration commands
display userlog export
Syntax
display userlog export
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display userlog export command to view the configuration and statistics about flow logs
exported to the log server.
Before using this command, configure the IP address and UDP port number of the log server with the
userlog flow export host command. Otherwise, the system may prompt you "No userlog export is
enabled".
Related commands: reset userlog flow export.
Examples
# View the configuration and statistics about flow logs. (Output of this command depends on the device
model.)
<Sysname> display userlog export
flow:
Export Version 1 logs to log server : enabled
Source address of exported logs : 1.1.1.1
Address of log server : 2.2.3.3 (port: 2000)
VPN-instance : abc
Total logs/UDP packets exported : 0/0
Address of log server : 2.2.4.3 (port: 2000)
Total logs/UDP packets exported : 0/0
Logs in buffer : 0
Table 24 Output description
Field Descri
p
tion
flow Configuration and statistics about flow logs
No userlog export is enabled
Flow logs are not sent to the log server at present. It
may be because exporting flow logs to the log server
is not configured, or flow logs are sent to the
information center.