R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

97
userlog flow export version
Syntax
userlog flow export version version-number
undo userlog flow export version
View
System view
Default level
2: System level
Parameters
version-number: Flow logging version number. The value is either 1 or 3.
Description
Use the userlog flow export version command to configure the flow logging version.
Use the undo userlog flow export version command to restore the default.
By default, flow logging version is 1.0.
If you configure the flow logging version multiple times, the latest configuration will take effect. Although
a device supports both of the two versions, only one can be active at one time.
Examples
# Set the flow logging version to 3.0.
<Sysname> system-view
[Sysname] userlog flow export version 3
userlog flow syslog
Syntax
userlog flow syslog
undo userlog flow syslog
View
System view
Default level
2: System level
Parameters
None
Description
Use the userlog flow syslog command to export flow logs to the information center.
Use the undo userlog flow syslog command to restore the default.
By default, flow logs are exported to the log server.
• The two export approaches of flow logs are mutually exclusive. If you configure two approaches
simultaneously, the system automatically exports the flow logs to the information center.