R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

99
NTP configuration commands
display ntp-service sessions
Syntax
display ntp-service sessions [ verbose ]
View
Any view
Default level
1: Monitor level
Parameters
verbose: Displays the detailed information of all NTP sessions. If you do not specify this keyword, only the
brief information of the NTP sessions will be displayed.
Description
Use the display ntp-service sessions command to view the information of all NTP sessions.
Examples
# View the brief information of all NTP sessions.
<Sysname> display ntp-service sessions
source reference stra reach poll now offset delay disper
********************************************************************************
[12345]127.127.1.0 127.127.1.0 3 1 64 33 0.0 0.0 0.0
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
Total associations : 1
Table 25 Output description
Field Descri
p
tion
source IP address of the clock source
reference
Reference clock ID of the clock source
1. If the reference clock is the local clock, the value of this field is related to
the value of the stra field:
• When the value of the stra field is 0 or 1, this field will be “LOCL”;
• When the stra field has another value, this field will be the IP address of the
local clock.
2. If the reference clock is the clock of another device on the network, the
value of this field will be the IP address of that device.
stra
Stratum level of the clock source, which determines the clock precision. The
value range is 1 to 16. The clock precision decreases from stratum 1 to stratum
16. A stratum 1 clock has the highest precision, and a stratum 16 clock is not
synchronized and cannot be used as a reference clock.
reach
Reachability count of the clock source. 0 indicates that the clock source in
unreachable.