R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

101
Field Descri
p
tion
clock stratum
Stratum level of the clock source, which determines the clock precision. The value
range is 1 to 16. The clock precision decreases from stratum 1 to stratum 16. A
stratum 1 clock has the highest precision, and a stratum 16 clock is not synchronized
and cannot be used as a reference clock.
clock status
Status of the clock source corresponding to this session, including
• configured: The session was created by a configuration command.
• dynamic: This session is established dynamically.
• master: The clock source is the primary reference source of the current system.
• selected: The clock source has survived the clock selection algorithm.
• candidate: The clock source is the candidate reference source.
• sane: The clock source has passed the sane authentication.
• insane: The clock source has failed the sane authentication.
• valid: The clock source is valid, which means the clock source meet the following
requirements: it has passed the authentication and is being synchronized; its
stratum level is valid; its root delay and root dispersion values are within their
ranges.
• invalid: The clock source is invalid.
• unsynced: The clock source has not been synchronized or the value of the stratum
level is invalid.
reference clock ID
Reference clock ID of the clock source
1. If the reference clock is the local clock, the value of this field is related to the
stratum level of the clock source:
• When the stratum level of the clock source is 0 or 1, this field will be “LOCL”;
• When the stratum level of the clock source has another value, this field will be the
IP address of the local clock.
2. If the reference clock is the clock of another device on the network, the value of
this field will be the IP address of that device.
local mode
Operation mode of the local device, including
• unspec: The mode is unspecified.
• active: Active mode.
• passive: Passive mode.
• client: Client mode.
• server: Server mode.
• bdcast: Broadcast server mode.
• control: Control query mode.
• private: Private message mode.
local poll
Poll interval of the local device, in seconds. The value displayed is a power of 2, for
example, if the displayed value is 6, it indicates that the poll interval of the local
device is 2
6
, that is, 64 seconds.