R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

114
View
System view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN instance by its name, where vpn-instance-name is a
string of 1 to 31 characters.
ip-address: IP address of the symmetric-passive peer. It must be a unicast address, rather than a
broadcast address, a multicast address or the IP address of the local clock.
peer-name: Host name of the symmetric-passive peer, a string of 1 to 20 characters.
authentication-keyid keyid: Specifies the key ID to be used for sending NTP messages to the peer, where
keyid is in the range of 1 to 4294967295.
priority: Specifies the peer designated by ip-address or peer-name as the first choice under the same
condition.
source-interface interface-type interface-number: Specifies the source interface for NTP messages. In an
NTP message the local device sends to its peer, the source IP address is the primary IP address of this
interface. interface-type interface-number represents the interface type and number.
version number: Specifies the NTP version, where number is in the range of 1 to 3 and defaults to 3.
Description
Use the ntp-service unicast-peer command to designate a symmetric-passive peer for the device.
Use the undo ntp-service unicast-peer command to remove the symmetric-passive peer designated for the
device.
No symmetric-passive peer is designated for the device by default.
Examples
# Designate the device with the IP address of 10.1.1.1 as the symmetric-passive peer of the local device,
configure the local device to run NTP version 3, and specify the source interface of NTP messages as
GE0/1.
<Sysname> system-view
[Sysname] ntp-service unicast-peer 10.1.1.1 version 3 source-interface gigabitethernet
0/1
ntp-service unicast-server
Syntax
ntp-service unicast-server [ vpn-instance vpn-instance-name ] { ip-address | server-name }
[ authentication-keyid keyid | priority | source-interface interface-type interface-number | version
number ] *
undo ntp-service unicast-server [ vpn-instance vpn-instance-name ] { ip-address | server-name }
View
System view