R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

116
RMON configuration commands
display rmon alarm
Syntax
display rmon alarm [ entry-number ]
View
Any view
Default level
1: Monitor level
Parameters
entry-number: Index of an RMON alarm entry, in the range 1 to 65535. If no entry is specified, the
configuration of all alarm entries is displayed.
Description
Use the display rmon alarm command to display the configuration of the specified or all RMON alarm
entries.
Related commands: rmon alarm.
Examples
# Display the configuration of all RMON alarm table entries.
<Sysname> display rmon alarm
AlarmEntry 1 owned by user1 is VALID.
Samples type : absolute
Variable formula : 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
Sampling interval : 10(sec)
Rising threshold : 50(linked with event 1)
Falling threshold : 5(linked with event 2)
When startup enables : risingOrFallingAlarm
Latest value : 0
Table 29 Output description
Field Descri
p
tion
AlarmEntry
entry-number owned
by owner is status
The status of the alarm entry entry-number created by the owner is status.
• entry-number: Alarm entry, corresponding to the management information base
(MIB) node alarmIndex.
• owner: Owner of the entry, corresponding to the MIB node alarmOwner.
• Status: Status of the entry identified by the index (VALID means the entry is valid,
and UNDERCREATION means invalid. You can use the display rmon command to
view the invalid entry, while with the display current-configuration and display this
commands you cannot view the corresponding rmon commands.), corresponding
to the MIB node alarmStatus.