R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

157
Related commands: snmp-agent trap enable and snmp-agent target-host.
Examples
# Configure the holding time of traps in the queue as 60 seconds.
<Sysname> system-view
[Sysname] snmp-agent trap life 60
snmp-agent trap queue-size
Syntax
snmp-agent trap queue-size size
undo snmp-agent trap queue-size
View
System view
Default level
3: Manage level
Parameters
size: Number of traps that can be stored in the trap sending queue, in the range 1 to 1,000.
Description
Use the snmp-agent trap queue-size command to set the size of the trap sending queue.
Use the undo snmp-agent trap queue-size command to restore the default queue size.
By default, up to 100 traps can be stored in the trap sending queue.
After traps are generated, they will be saved into the trap sending queue. The size of the queue
determines the maximum number of the traps that can be stored in the queue. When the size of the trap
sending queue reaches the configured value, the newly generated traps are saved into the queue, and
the earliest ones are discarded.
Related commands: snmp-agent trap enable, snmp-agent target-host, and snmp-agent trap life.
Examples
# Set the maximum number of traps that can be stored in the trap sending queue to 200.
<Sysname> system-view
[Sysname] snmp-agent trap queue-size 200
snmp-agent trap source
Syntax
snmp-agent trap source interface-type { interface-number | interface-number.subnumber }
undo snmp-agent trap source
View
System view
Default level
3: Manage level