R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

173
Table 44 Output description
Field Descri
p
tion
Server Name(IP) Name or IP address of the server
Server public key name Name of the host public key of the server
ssh client authentication server
Syntax
ssh client authentication server server assign publickey keyname
undo ssh client authentication server server assign publickey
View
System view
Default level
2: System level
Parameters
server: IP address or name of the server, a string of 1 to 80 characters.
keyname: Name of the host public key of the server, a string of 1 to 64 characters.
Description
Use the ssh client authentication server command on a client to configure the host public key of the server
so that the client can determine whether the server is trustworthy.
Use the undo ssh authentication server command to remove the configuration.
By default, the host public key of the server is not configured, and when logging into the server, the client
uses the IP address or host name used for login as the public key name.
If the client does not support first authentication, it will reject unauthenticated servers. In this case, you
must configure the public keys of the servers and specify the mappings between public keys and servers
on the client, so that the client uses the correct public key of a server to authenticate the server.
The specified host public key of the server must already exist.
Related commands: ssh client first-time enable.
Examples
# Configure the public key of the server with the IP address of 192.168.0.1 to be key1.
<Sysname> system-view
[Sysname] ssh client authentication server 192.168.0.1 assign publickey key1
ssh client first-time enable
Syntax
ssh client first-time enable
undo ssh client first-time