R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

12
Field Descri
p
tion
destination unreachable Number of input/output destination unreachable packets
source quench Number of input/output source quench packets
redirects Number of input/output redirection packets
echo reply Number of input/output replies
parameter problem Number of input/output parameter problem packets
timestamp Number of input/output time stamp packets
information request Number of input information request packets
mask requests Number of input/output mask requests
mask replies Number of input/output mask replies
information reply Number of output information reply packets
time exceeded Number of input/output expiration packets
display ip socket
Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Default level
1: Monitor level
Parameters
socktype sock-type: Displays the socket information of this type. The sock type is in the range 1 to 3,
corresponding to TCP, UDP and raw IP respectively.
task-id: Displays the socket information of this task. Task ID is in the range 1 to 150.
socket-id: Displays the information of the socket. Socket ID is in the range 0 to 3072.
Description
Use the display ip socket command to display socket information.
Examples
# Display the TCP socket information.
<Sysname> display ip socket
SOCK_STREAM:
Task = VTYD(38), socketid = 1, Proto = 6,
LA = 0.0.0.0:23, FA = 0.0.0.0:0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_KEEPALIVE SO_REUSEPORT SO_SENDVPNID(3073)
SO_SETKEEPALIVE,
socket state = SS_PRIV SS_ASYNC
Task = HTTP(36), socketid = 1, Proto = 6,