R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

19
Parameters
None
Description
Use the display tcp status command to display status of all TCP connections for monitoring TCP
connections.
Examples
# Display status of all TCP connections.
<Sysname> display tcp status
*: TCP MD5 Connection
TCPCB Local Add:port Foreign Add:port State
03e37dc4 0.0.0.0:4001 0.0.0.0:0 Listening
04217174 100.0.0.204:23 100.0.0.253:65508 Established
Table 8 Output description
Field Descri
p
tion
*
If the status information of a TCP connection contains *, the TCP adopts the MD5
algorithm for authentication.
TCPCB TCP control block
Local Add:port Local IP address and port number
Foreign Add:port Remote IP address and port number
State State of the TCP connection
display udp statistics
Syntax
display udp statistics
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display udp statistics command to display statistics of UDP packets.
Related commands: reset udp statistics.
Examples
# Display statistics of UDP packets.
<Sysname> display udp statistics
Received packets:
Total: 0
checksum error: 0