R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

36
View
User view
Default level
3: Manage level
Parameters
device: Name of a storage medium.
Description
Use the mount command to mount a hot swappable storage medium, such as a CF card. This command
is effective only when the device is in unmounted state.
By default, a storage medium is automatically mounted and in the mounted state after connected to the
device, which means you can use it without mounting it.
Do not remove the storage medium or swap a card when mounting or unmounting the device, or when
you are processing files on the storage medium. Otherwise, the file system could be damaged.
When a storage medium is connected to a lower version system, the system may not be able to recognize
the device automatically, and you need to use the mount command for the storage medium to function
normally.
Before removing a mounted storage medium from the system, you should first unmount it to avoid
damaging the device.
Related commands: umount.
Examples
# Mount a CF card.
<Sysname> mount cfa0:
% Mount cfa0: successfully.
%Apr 23 01:50:00:628 2008 Sysname VFS/0/LOG:
cfa0: mounted into slot 0.
move
Syntax
move fileurl-source fileurl-dest
View
User view
Default level
3: Manage level
Parameters
fileurl-source: Name of the source file.
fileurl-dest: Name of the target file or folder.
Description
Use the move command to move a file.