R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

49
View
Any view
Default level
2: System level
Parameters
by-linenum: Identifies each line of displayed information with a line number.
Description
Use the display saved-configuration command to display the contents of the configuration file saved for
the next startup of the device.
During device management and maintenance, you can use this command to check whether important
configurations are saved to the configuration file to be used at the next startup of the device.
If the system is not specified with a configuration file to the used at the next startup or the specified
configuration file does not exist, the display saved-configuration command displays the default
configuration file of the device. If the default configuration file does not exist, the system prompts “The
config file does not exist!”.
Related commands: display current-configuration, reset saved-configuration, and save .
Examples
# Display the configuration file saved for the next startup of the device.
<Sysname> display saved-configuration
#
version 5.20, Test 5310
#
sysname Sysname
#
domain default enable system
#
telnet server enable
#
multicast routing-enable
#
vlan 1
#
vlan 999
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
interface NULL0
#
---- More ----