R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

51
Description
Use the display startup command to display the configuration files for the system startup and the
configuration file(s) for the next system startup, and also the enabled/disabled status of the Boot ROM
access control function if the function is supported on the device.
Related commands: startup saved-configuration.
Examples
# Display the startup configuration file used at the current system startup and the one to be used at the
next system startup.
<Sysname> display startup
Current startup saved-configuration file: cfa0:/testcfg.cfg
Next startup saved-configuration file: cfa0:/testcfg.cfg
Table 12 Output description
Field Descri
p
tion
Current Startup saved-configuration file The configuration file used at the current startup
Next startup saved-configuration file Configuration file to be used at the next startup
reset saved-configuration
Syntax
reset saved-configuration
View
User view
Default level
3: Manage level
Parameters
None
Description
Use the reset saved-configuration command to delete the startup configuration file(s) saved on the
storage media of the device.
This command permanently deletes the startup configuration file from the device. Use it with caution.
Related commands: display saved-configuration and save.
Examples
# Delete the startup configuration file to be used at the next startup from the storage media of the device.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in cfa0 is being cleared.
Please wait ...........
Configuration file is cleared