R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

60
[Sysname] patch active 3
patch deactive
Syntax
patch deactive [ patch-number ]
View
System view
Default level
3: Manage level
Parameters
patch-number: Sequence number of a patch.
Description
Use the patch deactive command to stop running patches and the system will run at the original software
version.
• If you execute the command with specifying the sequence number of a patch, all the ACTIVE
patches (including the specified patch) after the specified patch turn to the DEACTIVE state.
• If you execute the command without specifying the sequence number of a patch, all the ACTIVE
patches turn to the DEACTIVE state.
• This command is not applicable to the patches in the RUNNING state.
Examples
# Stop running patch 3 and all the ACTIVE patches after patch 3.
<Sysname> system-view
[Sysname] patch deactive 3
patch delete
Syntax
patch delete [ patch-number ]
View
System view
Default level
3: Manage level
Parameters
patch-number: Sequence number of a patch. The valid values of this argument depend on the patch file
used.
Description
Use the patch delete command to delete patches and all the patches after the specified patch.
If you execute the command with specifying the sequence number of a patch, all the patches (including
the specified patch) after the specified patch will be deleted.