R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

65
The above information indicates to output log information with the severity from 0 to 4, trap information
with the severity from 0 to 7 and debugging information with the severity from 0 to 7 to the console. The
information source modules are all modules (default).
Table 16 Output description
Field Descri
p
tion
channel number A specified channel number, in the range 0 to 9.
channel name
A specified channel name, which varies with user’s configuration. For more
information, see the info-center channel name command.
MODU_ID
The ID of the module to which the information permitted to pass through the
current channel belongs
NAME
The name of the module to which the information permitted to pass through the
current channel belongs
Default means all modules are allowed to output system information, but the
module type varies with devices.
ENABLE
Indicates whether to enable or disable the output of log information, which could
be Y or N.
LOG_LEVEL The severity of log information, see Table 18.
ENABLE
Indicates whether to enable or disable the output of trap information, which could
be Y or N.
TRAP_LEVEL The severity of trap information, see Table 18.
ENABLE
Indicates whether to enable or disable the output of debugging information,
which could be Y or N.
DEBUG_LEVEL The severity of debugging information, see Table 18.
display info-center
Syntax
display info-center
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display info-center command to display the information of each output destination.
Examples
# Display configurations on each output destination.
<Sysname> display info-center
Information Center:enabled
Log host: