R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

70
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display logfile buffer command to display contents of the logfile buffer.
Note that all contents in the logfile buffer will be cleared after they are successfully saved into the log file
automatically or manually.
Examples
# Display the contents of the log file buffer.
<Sysname> display logfile buffer
%@387986%Jun 20 10:52:03 2006 Sysname %%10IC/7/SYS_RESTART:
System restarted --
The rest is omitted here.
display logfile summary
Syntax
display logfile summary
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display logfile summary command to display the configuration of the log file.
Examples
# Display the configuration of the log file.
<Sysname> display logfile summary
Log file is enabled.
Channel number : 9
Log file size quota : 10 MB
Log file directory : cfa0:/logfile
Writing frequency : 24 hour 0 min 10 sec
Table 21 Output description
Field Descri
p
tion
Log file is The current state of a log file, which could be enabled or disabled.