R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

74
Description
Use the info-center console channel command to specify the channel to output system information to the
console.
Use the undo info-center console channel command to restore the default output channel to the console.
By default, output of information to the console is enabled with channel 0 as the default channel (known
as console).
Note that the info-center console channel command takes effect only after the information center is
enabled first with the info-center enable command.
Examples
# Set channel 0 to output system information to the console.
<Sysname> system-view
[Sysname] info-center console channel 0
info-center enable
Syntax
info-center enable
undo info-center enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the info-center enable command to enable information center.
Use the undo info-center enable command to disable the information center.
The system outputs information to the log host or the console only after the information center is enabled
first.
By default, the information center is enabled.
Examples
# Enable the information center.
<Sysname> system-view
[Sysname] info-center enable
Info: Information center is enabled.
info-center logbuffer
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ] *
undo info-center logbuffer [ channel | size ]