R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

76
By default, the output of system information to the log file is enabled.
Examples
# Enable the logfile feature.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
View
System view
Default level
2: System level
Parameters
freq-sec: Frequency with which the system saves the log file, in the range 1 to 86,400 seconds.
Description
Use the info-center logfile frequency command to configure the frequency with which the system saves
the log file.
Use the undo info-center logfile frequency command to restore the default frequency.
By default, the frequency with which the system saves the log file is 86400 seconds.
Examples
# Configure the frequency with which the system saves the log file as 60,000 seconds.
<Sysname> system-view
[Sysname] info-center logfile frequency 60000
info-center logfile size-quota
Syntax
info-center logfile size-quota size
undo info-center logfile size-quota
View
System view
Default level
2: System level
Parameters
size: The maximum capacity of a disk, in the range 1 MB to 10 MB.
Description
Use the info-center logfile size-quota command to set the maximum storage space reserved for a log file.