R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101
78
Default level
2: System level
Parameters
host-ip: The IP address of the log host.
port port-number: Specifies the number of the port that receives the system information on the log host.
The value ranges from 1 to 65535 and defaults to 514. Besides, the value of the port-number argument
should be the same as the value configured on the log host, otherwise, the log host cannot receive system
information.
channel: Specifies the channel through which system information can be output to the log host.
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, see the info-center channel name command.
facility local-number: The logging facility of the log host. The value can be local0 to local7 and defaults
to local7. Logging facility is mainly used to mark different logging sources, query and filer the logs of the
corresponding log source.
Description
Use the info-center loghost command to specify a log host and to configure the related parameters.
Use the undo info-center loghost command to restore the default configurations on a log host.
By default, output of system information to the log host is disabled. When it is enabled, the default
channel name will be loghost and the default channel number will be 2.
Note that:
• The info-center loghost command takes effect only after the information center is enabled with the
info-center enable command.
• Ensure to input a correct IP address while using the info-center loghost command to configure the
IP address for a log host. System will prompt an invalid address if the loopback address (127.0.0.1)
is input.
• A maximum number of 4 hosts (different) can be designated as the log host.
Examples
# Output log information to a Unix station with the IP address being 1.1.1.1.
<Sysname> system-view
[Sysname] info-center loghost 1.1.1.1
info-center loghost source
Syntax
info-center loghost source interface-type interface-number
undo info-center loghost source
View
System view