R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

83
Output
destinatio
n
Modules
allowed
LOG TRAP
DEBUG
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Log file
default (all
modules)
Enabled Debug Enabled Debug Disabled Debug
Examples
# Set the output channel for the log information of VLAN module to snmpagent and to output information
with severity being emergency. Log information of other modules cannot be output to this channel; other
types of information of this module may or may not be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent log state off
[Sysname] info-center source vlan channel snmpagent log level emergencies state on
# Set the output channel for the log information of VLAN module to snmpagent and to output information
with severity being emergency. Log information of other modules and all the other system information
cannot be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent debug state off log state off trap
state off
[Sysname] info-center source vlan channel snmpagent log level emergencies state on
info-center synchronous
Syntax
info-center synchronous
undo info-center synchronous
View
System view
Default level
2: System level
Parameters
None
Description
Use the info-center synchronous command to enable synchronous information output.
Use the undo info-center synchronous command to disable the synchronous information output.
By default, the synchronous information output is disabled.