R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

NOTE:

• If system information, such as log information, is output before you input any information under a curren

command line prompt, the system will not display the command line prompt after the system information

output.

• If system information is output when you are inputting some interactive information (non Y/N

confirmation information), then after the system information output, the system will not display the

command line prompt but your previous input in a new line.

Examples

# Enable the synchronous information output function, and then input the display interface gig command

to view Ethernet interface information.

<Sysname> system-view

[Sysname] info-center synchronous

% Info-center synchronous output is on

[Sysname] display interface gig

At this time, the system receives log messages, and it then displays the log messages first. After the system

displays all the log messages, it displays the user’s previous input, which is display interface gig in this

example.

%Apr 29 08:12:44:71 2007 Sysname IFNET/4/LINK UPDOWN:

GigabitEthernet0/1: link status is UP

[Sysname] display interface gig

After the above information is displayed, you can input abitethe to complete your input of the display

interface gigabitethernet command, and then press the Enter key to execute the command.

# Enable the synchronous information output function, and then save the current configuration (input

interactive information).

<Sysname> system-view

[Sysname] info-center synchronous

% Info-center synchronous output is on

[Sysname] save

The current configuration will be written to the device. Are you sure? [Y/N]:

At this time, the system receives the log information, and it then displays the log information first. After the

system displays all the log information, it displays the user’s previous input, which is [Y/N] in this

example.

%May 21 14:33:19:425 2007 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44

[Y/N]:

After the above information is displayed, you can input Y or N to complete your input before the output

of the log information.

info-center syslog channel

Syntax

info-center syslog channel { channel-number | channel-name }

undo info-center syslog channel

View

System view