R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

89
reset trapbuffer
Syntax
reset trapbuffer
View
User view
Default level
3: Manage level
Parameters
None
Description
Use the reset trapbuffer command to reset the trap buffer contents.
Examples
# Reset the trap buffer contents.
<Sysname> reset trapbuffer
terminal debugging
Syntax
terminal debugging
undo terminal debugging
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use the terminal debugging command to enable the display of debugging information on the current
terminal.
Use the undo terminal debugging command to disable the display of debugging information on the
current terminal.
By default, the display of debugging information on the current terminal is disabled.
Note that:
• The debugging information is displayed (using the terminal debugging command) only after the
monitoring of system information is enabled on the current terminal first (using the terminal monitor
command).
• The configuration of this command is valid for only the current connection between the terminal and
the device. If a new connection is established, the display of debugging information on the terminal
restores the default.