R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

Examples

# Enable the display of debugging information on the current terminal.

<Sysname> terminal debugging

Info: Current terminal debugging is on.

terminal logging

Syntax

terminal logging

undo terminal logging

View

User view

Default level

1: Monitor level

Parameters

None

Description

Use the terminal logging command to enable the display of log information on the current terminal.

Use the undo terminal logging command to disable the display of log information on the current

terminal.

By default, the display of log information on the current terminal is disabled.

Note that:

• The log information is displayed (using the terminal logging command) only after the monitoring of

system information is enabled on the current terminal first (using the terminal monitor command).

• The configuration of this command is valid for only the current connection between the terminal and

the device. If a new connection is established, the display of log information on the terminal restores

the default.

Examples

# Disable the display of log information on the current terminal.

<Sysname> undo terminal logging

Info: Current terminal logging is off.