R3166-R3206-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

91
Parameters
None
Description
Use the terminal monitor command to enable the monitoring of system information on the current
terminal.
Use the undo terminal monitor command to disable the monitoring of system information on the current
terminal.
By default, monitoring of the system information on the console is enabled and that on the monitor
terminal is disabled.
Note that:
• You need to configure the terminal monitor command before you can display the log, trap, and
debugging information.
• Configuration of the undo terminal monitor command automatically disables the monitoring of log,
trap, and debugging information.
• The configuration of this command is valid for only the current connection between the terminal and
the device. If a new connection is established, the monitoring of system information on the terminal
restores the default.
Examples
# Enable the monitoring of system information on the current terminal.
<Sysname> terminal monitor
Info: Current terminal monitor is on.
terminal trapping
Syntax
terminal trapping
undo terminal trapping
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use the terminal trapping command to enable the display of trap information on the current terminal.
Use the undo terminal trapping command to disable the display of trap information on the current
terminal.
By default, the display of trap information on the current terminal is enabled.
Note that:
• The trap information is displayed (using the terminal trapping command) only after the monitoring
of system information is enabled on the current terminal first (using the terminal monitor command).