R3166-R3206-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

143
Figure 62 SSH client configuration interface
In the window shown in Figure 62, click Open. If the connection is normal, you will be prompted to enter
the username and password. After entering the correct username (client001) and password (aabbcc),
you can enter the configuration interface of Firewall.
When the firewall acts as a server for publickey authentication
Network requirements
• The host (the SSH client) and Firewall (the SSH server) are directly connected through the Ethernet
interfaces.
• The host runs SSH2.0 client software to log into Firewall for configuration.
• Publickey authentication is used, and the public key algorithm is RSA.
Figure 63 Firewall acts as server for publickey authentication
Configuration procedure
1. Configure the SSH server
# Generate RSA and DSA key pairs and enable SSH server.