R3166-R3206-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

• The IP address of the Firewall is 1.1.1.1/24, and IP address of TFTP Server is 2.2.2.2/24. The

Firewall and TFTP server can reach each other.

Figure 17 Network diagram of hotfix configuration

Configuration procedure

1. Configure TFTP Server. The configuration varies depending on server type and the configuration

procedure is omitted.

• Enable the TFTP server function.

• Save the patch file patch_xxx.bin to the directory of the TFTP server.

2. Configure the Firewall

CAUTION:

Make sure the free space of the storage media on the device is big enough to store the patch file.

# Before upgrading the software, use the save command to save the current system configuration. The

configuration procedure is omitted.

# Load the patch file patch_xxx.bin from the TFTP server to the root directory of the device storage

media.

<Firewall> tftp 2.2.2.2 get patch_xxx.bin

# Install the patch.

<Firewall> system-view

[Firewall] patch install cfa0:

Patches will be installed. Continue? [Y/N]:y

Do you want to continue running patches after reboot? [Y/N]:y

Installing patches........

Installation completed, and patches will continue to run after reboot.