R3166-R3206-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

48
Table 8 Severity description
Severit
y
Severit
y
v
alue Descri
p
tion
Emergency 0 The system is unusable.
Alert 1 Action must be taken immediately
Critical 2 Critical conditions
Error 3 Error conditions
Warning 4 Warning conditions
Notice 5 Normal but significant condition
Informational 6 Informational messages
Debug 7 Debug-level messages
Eight output destinations and ten channels of system
information
The system supports eight information output destinations, including the console, monitor terminal
(monitor), log buffer, log host, trap buffer, SNMP module, Web interface (syslog) and log file.
The system supports ten channels. The eight channels 0 through 6, and channel 9 are configured with
channel names, output rules, and are associated with output destinations by default. The channel names,
output rules and the associations between the channels and output destinations can be changed through
commands. Besides, you can configure channels 7, and 8 without changing the default configuration of
the eight channels.
Table 9 Information channels and output destinations
Information
channel number
Default channel
name
Default output
destination
Description
0 console Console
Receives log, trap and debugging
information.
1 monitor Monitor terminal
Receives log, trap and debugging
information, facilitating remote
maintenance.
2 loghost Log host
Receives log, trap and debugging
information and information will be
stored in files for future retrieval.
3 trapbuffer Trap buffer
Receives trap information, a buffer
inside the router for recording
information.
4 logbuffer Log buffer
Receives log and debugging
information, a buffer inside the router
for recording information.
5 snmpagent SNMP module Receives trap information.
6 channel6 Web interface Receives log information.
7 channel7 Not specified
Receives log, trap, and debugging
information.