R3166-R3206-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

52
Configuring information center
Information center configuration task list
Complete the following tasks to configure information center:
Task Remarks
Outputting system information to the console Optional
Outputting system information to a monitor terminal Optional
Outputting system information to a log host Optional
Outputting system information to the trap buffer Optional
Outputting system information to the log buffer Optional
Outputting system information to the SNMP module Optional
Outputting system information to the web interface Optional
Saving system information to a log file Optional
Configuring synchronous information output Optional
Outputting system information to the console
Outputting system information to the console
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
For default channel names,
see Table 9.
Configure the channel through
which system information can be
output to the console
info-center console channel
{ channel-number |
channel-name }
Optional
By default, system information is
output to the console through
channel 0 (known as console).
Configure the output rules of
system information
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional
See “Default output rules of system
informati
on.”
Configure the format of the time
stamp
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional
The time stamp format for log, trap
and debugging information is date
by default.