R3166-R3206-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

55
To do… Use the command… Remarks
Specify the source IP address for
the log information
info-center loghost source
interface-type
interface-number
Optional
By default, the source interface is
determined by the matched route, and the
primary IP address of this interface is the
source IP address of the log information.
Configure the format of the time
stamp for system information
output to the log host
info-center timestamp loghost
{ date | no-year-date | none }
Optional
date by default.
Outputting system information to the trap buffer
NOTE:
The trap buffer receives the trap information only, and discards the lo
g
and debu
gg
in
g
information even
if you have configured to output them to the trap buffer.
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
For default channel names,
see Table 9.
Configure the channel through
which system information can be
output to the trap buffer and
specify the buffer size
info-center trapbuffer [ channel
{ channel-number |
channel-name } | size buffersize ]
*
Optional
By default, system information is
output to the trap buffer through
channel 3 (known as trapbuffer)
and the default buffer size is 256.
Configure the output rules of the
system information
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional
See “Default output rules of system
informati
on.”
Configure the format of the time
stamp
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional
The time stamp format for log, trap
and debugging information is date
by default.
Outputting system information to the log buffer
NOTE:
You can configure to output log, trap, and debugging information to the log buffer, but the log buffer
receives the log and debugging information only, and discards the trap information.