R3166-R3206-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

76
Table 18 System log configuration items
Item Descri
p
tion
Time/Date Displays the time when the system logs are generated.
Source Displays the module that generates the system logs.
Level
Displays the severity level of the system logs. For more information about severity
levels, see Table 19.
Description Displays the contents of the system logs.
Table 19 System log severity level
Severit
y
level Descri
p
tion Value
Emergency The system is unavailable. 0
Alert
Information that demands prompt
reaction
1
Critical Critical information 2
Error Error information 3
Warning Warnings 4
Notification
Normal information that needs to
be noticed
5
Information
Informational information to be
recorded
6
Debug
Information generated during
debugging
7
Note: A smaller value represents a higher severity level.
Displaying connection limit logs
Select Log Report > Report > Connection Limit Log from the navigation tree to enter the page as shown
in Figure 30.
Figure 30 Connection limit log configuration page
Table 20 Connection limit log configuration items
Item Descri
p
tion
Time/Date Displays the time when the connection limit logs are generated.
Type
Displays the types of the traffic alarms: The number of source IP-based connections
exceeds the upper limit or the number of destination IP-based connections exceeds
the upper limit.
Source Zone Displays the source zone of the connection.
Source IP Displays the source IP address of the connection.