R3166-R3206-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

78
Table 22 Blacklist log configuration items
Item Descri
p
tion
Time/Date Displays the time when the blacklist members are generated.
Mode Displays whether the blacklist members are newly added or removed.
Source IP Displays the IP addresses of the blacklist members.
Reason
Displays the reasons why the addresses are added to the blacklist, including manual
add and automatic add:
• Automatic add means that the system automatically adds the source IP address to
the blacklist.
• Manual add means that the blacklist is manually added through Web interface.
Hold Time Displays the hold time of the blacklist members.
Displaying inter-zone policy logs
Inter-zone logs are logs of the flows matching an inter-zone policy. To record inter-zone policy logs, you
need to enable the Syslog function when configuring an inter-zone policy. For more information, see
Access Control Configuration Guide.
Select Log Report > Report > InterZone Policy Log from the navigation tree to enter the page as shown
in Figure 33.
Figure 33 Inter-zone policy log configuration page
Table 23 Inter-zone policy log configuration items
Item Descri
p
tion
Start Time Displays the time when the flows are created.
End Time Displays the time when the flows are removed.
Source Zone Displays the source zone of the flows.
Destination Zone Displays the destination zone of the flows.
Policy ID Displays the ID of the inter-zone policy that the flows match.
Action Displays the actions taken against the flows, permitted or denied.
Protocol Type Displays the protocol type of the flows.