R3166-R3206-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

Item Descri

tion

Flow Information

Displays the flow information.

• If the protocol type is TCP or UDP, the displayed flow information is source IP

address:source port-->destination IP address:destination port, for example,

1.1.1. 2 :10 26 - - > 1.1. 2.10 : 6 9.

• If the protocol type is ICMP, the displayed flow information is source IP

address-->destination IP address,ICMP type (ICMP code), for example,

1.1.1. 2- - > 1.1. 2.10 , e c h o ( 8 ) .

• If the protocol type is another type except these three, the displayed flow

information is source IP address-->destination IP address, for example,

1.1.1. 2- - > 1.1. 2.10 .

Displaying user logs

NOTE:

To display user logs through the Web interface, you need to configure outputting user logs to the

information center.

Displaying flow logs

Select Log Report > Report > Userlog from the navigation tree to enter the page for displaying flow logs.

If you select the 1.0 radio box, the flow logging information will be displayed, as shown in Figure 34; if

you select the 3.0 radio box, the flow logging 3.0 information will be displayed, as shown in Figure 35.

Figure 34 Flow logging

1.0 log report