R3166-R3206-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

81
Table 25 Flow logging 3.0 configuration items
Item Descri
p
tion
Time/Date Displays the time and date when a flow log was generated.
Protocol Type Displays the protocol type of a flow.
Flow Information
Displays the flow information.
• If the protocol type is TCP or UDP, the displayed flow information is source IP
address:source port-->destination IP address:destination port, for example,
1.1.1. 2 :10 26 - - > 1.1. 2.10 : 6 9.
• If the protocol type is another type except TCP or UDP, the displayed flow
information is source IP address-->destination IP address, for example,
1.1.1. 2- - > 1.1. 2.10 .
Received Packets/Bytes Displays the number of received packets/bytes.
Send Packets/Bytes Displays the number of sent packets/bytes.
Source VPN Displays the source VPN of the packets.
Destination VPN Displays the destination VPN of the packets.
Start Time Displays the time when a flow was created.
End Time Displays the time when a flow was removed.
Flow Action
Displays the operator field of a flow.
• (1)Normal over: The flow ended normally.
• (2)Aged for timeout: Timer timed out
• (3)Aged for reset or config-change: Flow aging due to configuration change
• (4)Aged for no enough resource: Flow aging due insufficient resource
• (5)Aged for no-pat of NAT: One to one NAT. In this case, only the source IP
address, the source IP address after translation and the time fields are available.
• (6)Active data flow timeout: The life time of the flow reached the limit.
• (8)Data flow created: Record for the flow when it was created.
• (254)Other: Other reasons