R3166-R3206-HP High-End Firewalls VPN Command Reference-6PW101

4
Field Descri
p
tion
input error Number of input error packets
packets output Total number of output packets
output error Number of output error packets
interface tunnel
Syntax
interface tunnel number
undo interface tunnel number
View
System view
Default level
2: System level
Parameters
number: Number of the tunnel interface. The value ranges from 0 to 4095. The number of tunnels that
can be created is restricted by the total number of interfaces and the memory.
Description
Use the interface tunnel command to create a tunnel interface and enter its view.
Use the undo interface tunnel command to delete a specific tunnel interface.
By default, no tunnel interface is created on the firewall.
Use the interface tunnel command to enter the interface view of a specific tunnel. If the specified tunnel
interface does not exist, the command creates the tunnel interface and enters tunnel interface view.
A tunnel interface number is only locally significant. Thus, the tunnel interfaces on the two ends of a
tunnel can use the same or different interface numbers.
Related commands: display interface tunnel, source, destination, tunnel-protocol.
Examples
# Create interface Tunnel 3 and enter its view.
<Sysname> system-view
[Sysname] interface tunnel 3
[Sysname-Tunnel3]
gre checksum
Syntax
gre checksum
undo gre checksum
View
Tunnel interface view