R3166-R3206-HP High-End Firewalls VPN Command Reference-6PW101

25
interval-time
Syntax
interval-time interval-time
undo interval-time
View
IKE DPD view
Default level
2: System level
Parameters
interval-time: Sets DPD interval in seconds, in the range of 1 to 300 seconds. When the local end sends
an IPsec packet, it checks the time the last IPsec packet was received from the peer. If the time interval
exceeds the DPD interval, it sends a DPD hello to the peer.
Description
Use the interval-time command to set the DPD query triggering interval for a DPD detector.
Use the undo interval-time command to restore the default.
The default DPD interval is 10 seconds.
Examples
# Set the DPD interval to 1 second for dpd2.
<Sysname> system-view
[Sysname] ike dpd dpd2
[Sysname-ike-dpd-dpd2] interval-time 1
local
Syntax
local { multi-subnet | single-subnet }
undo local
View
IKE peer view
Default level
2: System level
Parameters
multi-subnet: Sets the subnet type to multiple.
single-subnet: Sets the subnet type to single.
Description
Use the local command to set the subnet type of the local security gateway for IKE negotiation.
Use the undo local command to restore the default.
By default, the subnet is a single one.