R3166-R3206-HP High-End Firewalls VPN Command Reference-6PW101

34
View
System view
Default level
2: System level
Parameters
slot slot-number: Specifies an interface card by its slot number.
Description
Use the cryptoengine enable command to enable the encryption engine.
Use the undo cryptoengine enable command to disable the encryption engine.
By default , the encryption engine Is enabled.
Examples
# Enable the encryption engine.
<Sysname> system-view
[Sysname] cryptoengine enable
display ipsec policy
Syntax
display ipsec policy [ brief | name policy-name [ seq-number ] ]
View
Any view
Default level
1: Monitor level
Parameters
brief: Displays brief information about all IPsec policies.
name: Displays detailed information about a specified IPsec policy or IPsec policy group.
policy-name: Name of the IPsec policy, a string of 1 to 15 characters.
seq-number: Sequence number of the IPsec policy, in the range 1 to 10000
Description
Use the display ipsec policy command to display information about IPsec policies.
If you do not specify any parameters, the command displays detailed information about all IPsec
policies.
If you specify the name policy-name combination but leave the seq-number argument, the command
displays detailed information about the specified IPsec policy group.
Related commands: ipsec policy (system view).
Examples
# Display brief information about all IPsec policies.
<Sysname> display ipsec policy brief
IPsec-Policy-Name Mode acl ike-peer name Mapped Template