R3166-R3206-HP High-End Firewalls VPN Command Reference-6PW101

73
display l2tp tunnel
Syntax
display l2tp tunnel
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display l2tp tunnel command to display information about L2TP tunnels.
Examples
# Display information about L2TP tunnels.
<Sysname> display l2tp tunnel
Total tunnel = 1
LocalTID RemoteTID RemoteAddress Port Sessions RemoteName
1 1 20.1.1.2 1701 1 lns
Table 18 Output description
Field Descri
p
tion
Total tunnel Number of active tunnels
LocalTID Unique ID of the tunnel at the local end
RemoteTID Unique ID of the tunnel at the remote end
RemoteAddress IP address of the peer
Port Port number of the peer
Sessions Number of sessions within the tunnel
RemoteName Name of the tunnel at the peer
interface virtual-template
Syntax
interface virtual-template virtual-template-number
undo interface virtual-template virtual-template-number
View
System view
Default level
2: System level